上一个
下一个
产品中心 Products Center
搜索
全部分类
1/1
浏览量:
1000
607826 AQUATUFF 25 LTR
浏览量:
1000
产品编号
651-607826
数量
-
+
1
产品描述
Product information
Unitor™ Aquatuff™ is a highly concentrated alkaline cleaner that is free from hydrocarbon solvents and biodegradable.
Features
- Highly concentrated
- Does not contain nonylphenol ethoxylates or other estrogenic compounds
- Biodegradable
- Free from hydrocarbon solvents
- Aquatuff is most suitable for removal of wax deposits
- It has numerous cleaning applications including removal of grease, vegetable & animal oil, soot & general dirt & grime
- Approved by Marinfloc AB for use in engine rooms
Benefits
- Removal of soot deposits from inert gas systems
- Very effective and economical in use
- Completely safe on epoxy coatings
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Orange |
|---|---|
| Density [g/ml] | 1,1 |
| Form | Liquid |
| pH | 13 |
Technical data
| Not Compatible | The concentrated product may react with aluminium, zinc, tin and their alloys. |
|---|---|
| Volume (l) | 25 |
Approvals
- This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.
- Approved by Marinfloc AB for use in engine rooms
- Nordic Swan eco-labelled.
Directions for use
General Cleaning - Deck and Engine Room
Unitor™ Aquatuff™ can be used for different types of cleaning, and it can be applied by brush, hand spray, high- and low pressure washing machines etc. It can be applied on vertical surfaces by adding Unitor™ Foam-Agent™ (Product no. 614537) for increased resident time.
Dependent on degree of contamination typical dosage is about 1-5%.
For safe handling and optimal dilution we recommend the use of the UNITOR™ MIXING STATION 4-14.
Removal of soot from Inert Gas Systems (IGS)
- Apply Unitor™ Aquatuff™ with a Unitor™ High Pressure Cleaning Machine and use 1:4 with water. However, if used with a hand sprayer, apply the product neat on the surfaces, allowing 1 litre per 12m2.
- Leave for about 30-45 minutes. The surface remains wet.
- Wash down with hot water (80°C) and check the results.
- Repeat the procedure if necessary.
Cargo hold cleaning
Unitor™ Aquatuff™ can be used for cargo hold cleaning after soot, coal, pet coke and other bulk materials.
**
**
Dosing method
- For best foaming abilities use Unitor™ Foam Agent in conjunction with Aquatuff
- Apply Unitor™ Aquatuff™ mixed 20% in water, using the Unitor™ Cargo hold Cleaning kits and its foam nozzle.
- Leave for 10--15 minutes. The surface remains wet.
- Wash down with Tornado 3 water jet. For best results, direct the water jet at the lowest parts of the hold first and work upwards.
- Repeat the procedure if necessary.
产品特性
• 强效水溶性的碱性清洁剂
• 不含壬基苯酚、聚乙氧基醇或相关激素成分
• 可生物降解
• 非碳氢化合物溶液
• 可除去惰性气体系统的烟垢沉积物
• 它有许多清洁应用，包括去除油脂 ，植物和动物油，烟灰和一般污垢和污垢
• Marinfloc AB 认证可使用于机舱
优势
• 去除惰性气体系统中的烟灰沉积物
• 使用有效且经济
• 环氧涂料完全安全
订购信息
Product number Product name
607826 AQUATUFF 25 LTR
认证
• 根据MARPOL附则V，该组合物符合不对海洋环境有害的标准，并且当用于清洁货舱和船舶外表面时可以排入海中。
• Marinfloc AB 认证可使用于机舱
使用说明
一般清洗
Unitor™ Aquatuff™ 可用于所有类型的清洁和去油 ，它可用于刷洗、手工喷洗 、高压和低压洗舱机等多种方法。在洗垂直的舱璧时 ，请添加Wilhelmsen Foam-Agent (产品编号651 614537)(请参考附注) ，以增加Aquatuff在垂直面上的吸附时间。
清洗惰性气体系统的烟垢(IGS)
1. 使用高压清洗机将1:4 的Aquatuff 水溶液喷射其上，如果用手提式喷枪 ，则将纯液（不需稀释）喷射到表面上，每12 平方米面积使用Aquatuff1 公升。.
2. 留置约30-40 分钟，表面要保持湿润 。.
3. 用热水（80°C）彻底冲洗干净 ，并检查货舱使否干净 。.
4. 必要时重复以上操作 。
货舱清洗
UNITOR™Aquatuff™可用于烟灰，煤炭 ，石油焦等大宗材料后货舱清洁。
加药方式
1. 使用喷雾泡沫设备将Unitor™Aquatuff™混合10-25％（比例1：9至1：3）混合在水中 。
2. 留置约30-40 分钟 ，表面要保持湿润 。
3. 用高压装置冲洗。为获得最佳效果，请先将高压射流引导至货舱的最低部位，然后再向上工作。
4. 必要时重复以上操作。
如果在装载之前将Unitor™Slip-Coat™（产品编号652737015和652 737023）应用于货舱表面 ，则可降低清洁溶液中Unitor™Aquatuff™的浓度。
将Unitor™Aquatuff™与海水混合时，需要考虑以下因素 ：
1. 海水可能会降低洗涤剂的发泡质量
2. 海水可能会影响清洁溶液的pH值 ，从而降低清洁效果
3. 海水表示腐蚀风险的表面和所用的设备
将Unitor™Aquatuff™与海水混合时，建议浓度至少为20 - 25％（比例2：9至1-3）。
版权所有：江苏OG真人贸易有限公司 备案号：苏ICP备17042192号-1 网站建设：