产品中心 Products Center
571513 ALKLEEN SAFETY LIQ 25 LTR
Product information
Unitor™ Alkleen Safety Liquid™ minimises the hazards in handling caustic based materials.
Features
- Non-caustic
- Non-flammable
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds
- Non-corrosive to ferrous metals
- IMO approved and listed in Annex 10 of the MEPC.2/ Circular
Benefits
- Suitable for all tank-coatings
- Can be used for gas and hydrocarbon-freeing of tanks
- Can be used for deodorizing
- Safe, meets current regulation
Specification
General
Invent Hazard Material (IMO/EU) classification | C-49 |
---|
Physical properties
Appearance | Colourless |
---|---|
Density [g/ml] | 1,1 |
Form | Liquid |
pH | 13 |
Technical data
Not Compatible | The concentrated product may react with aluminium, zinc, tin and their alloys. |
---|
Performance data
Pump Speed [cpm] |
---|
Variants
Product name | Product number |
---|---|
571521 (supersedes 602862) | |
571513 |
Approvals
Unitor™ Alkleen Safety Liquid™ has been evalsuated by the BLG Working Group on the evalsuation of Safety and Pollution Hazards of Chemicals (ESPH) and found to meet the requirements of paragraph 13.5.2 of the MARPOL Annex II and is consolidated into annex 10 of the MEPC.2/Circular.
Directions for use
Cargo tank cleaning following discharge of drying, semi-drying and non drying natural oils and fats.
As soon as possible after the cargo has been discharged, the tanks should be flushed with cold water to prevent polymerisation and evaporation of the lighter oil fractions.
Whenever possible, the cleaning solution should be heated to 60-80°C. However, the polymerising nature of some natural oils may demand lower cleaning temperatures.
Dosing method The most economical method of using Unitor™ Alkleen Safety Liquid™ is by direct injection followed by recirculation washing, using tank cleaning machines. If this method is not possible, hand spraying provides acceptable options. Refer to dosage table for dosage rates.
Cargo Residue | Hand Spray | Recirculation | Direct Injection | *Approx. recirculation consumption, litres per 1000 m3 tank space |
---|---|---|---|---|
Fatty acids, fatty alcohols Fish oils | 100% | 3-5% | 2-4% | 180-300 |
Drying & Semi drying | 100% | 3-5% | 2-4% | 180-300 |
Vegetable oil | 50-100% | 2-4% | 1-3% | 120-240 |
Non drying vegetable oil | 50-100% | 2-4% | 1-3% | 120-240 |
*When using the recirculation method, the tank to be cleaned is filled with water to a level that the heating coils are covered. As an average, this is approximately 0.6% of the volume of the tank. The figures mentioned in this column are the quantity of Unitor™ Alkleen Safety Liquid™ required to obtain the recommended solution strengths.
产品特性
• 非腐蚀
• 非易燃
• 不含壬基酚乙氧基化物或其他雌激素化合物
• 对黑色金属无腐蚀性
• IMO批准并列入MEPC.2 / Circular的附件10
优势
• 适用于所有舱用涂料
• 可用于储罐的气体和碳氢化合物
• 可用于除臭
• 安全且符合现行法规
订购信息
Product number Product name
571521 ALKLEEN SAFETY LIQ 210 LTR
571513 ALKLEEN SAFETY LIQ 25 LTR
认证
Unitor™ Alkleen Safety Liquid™ 已经过BLG化学品安全和污染危害评估工作组(ESPH)的评估,并且符合MARPOL附则II第13.5.2段的要求,并被合并到附件10中。MEPC.2 /通函。
版权所有:江苏OG真人贸易有限公司 备案号:苏ICP备17042192号-1 网站建设: