上一个
下一个
产品中心 Products Center
搜索
全部分类
1/1
浏览量:
1000
571430 COLDWASH HD 25 LTR
浏览量:
1000
产品编号
651-571430
数量
-
+
1
产品描述
Product information
UNITOR™ Coldwash HD™ splits after cleaning, releasing the oil phase for reclamation. Powerful degreaser with quick penetration and good emulsifying properties. The emulsifying agents in this product are biological degradable. Does not contain nonyl phenol ethoxylates or other estrogenic compounds. Effective on mineral oils and petroleum based residues. Safe to use on most metal surfaces and painted surfaces. Removes oil contamination from machinery, engine parts and bilges. Soak cleaning of machinery parts. Rapid rinsing, leaves clean and oil-free surfaces.
Features
- Emulsifying agents are biologically degradable
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds
- Effective on mineral oils and petroleum based residues
- Safe to use on most metal surfaces and painted surfaces
- Removes oil contamination from machinery, engine parts and bilges
- Allows soak cleaning of machinery parts
Benefits
- Easy to recover as it splits after cleaning, releasing the oil phase
- Powerful degreaser with quick penetration and good emulsifying properties
- Rapid rinsing, leaves clean and oil-free surfaces
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Clear brown |
|---|---|
| Density [g/ml] | 0,90 |
| Flash Point [°C] | Above 61 oC |
| Form | Liquid |
Technical data
| Not Compatible | May swell rubber and synthetic rubber. |
|---|
Directions for use
This product is excellent for use on soiled surfaces, bilges and machinery parts.
This degreaser must be applied neat with a brush, by hand spray, immersion, soaking etc. The contact, or soaking, time should be between 15 minutes to 2 hours before washing off with hot or cold water. Hot water will improve the result of the cleaning.
Spot cleaning
Spray neat UNITOR™ Coldwash HD™ onto surfaces to be cleaned. The contact time should be at least 30 minutes or up to 2 hours if time allows. Bulkheads/walls can be washed down by use of high pressure cleaning machines. The best result is achieved with hot water between 60--80°C.
Spray method
Spray UNITOR™ Coldwash HD™ neat onto soiled surfaces. The contact time should be between 15--30 minutes, and then wash off with water. To clean stubborn deposits, mechanical agitation such as scrubbing will improve the cleaning.
Soak method
Immerse the parts to be cleaned into a bath of neat UNITOR™ Coldwash HD™ for 30 minutes, and then wash off with water.
Circulation method
Cleaning of equipment such as lube oil heat exchangers, fuel oil preheaters and filters can be accomplished by circulating neat UNITOR™ Coldwash HD™.
产品特性
• 乳化剂是可生物降解的
• 不含壬基酚乙氧基化物或其他雌激素化合物
• 对矿物油和石油残留物有效
• 可在大多数金属表面和涂漆表面上使用
• 可在大多数金属表面和涂漆表面上使用
• 允许对机器部件进行浸泡清洁
优势
• 清洁后分解，释放油污 ，易于恢复
• 强力脱脂剂，具有快速渗透和良好的乳化性能
• 快速冲洗，保持清洁和无油表面
清洁后拆分，释放油相进行回收。强力脱脂剂，具有快速渗透和良好的乳化性能 。该产品中的乳化剂是可生物降解的。不含壬基酚乙氧基化物或其他雌激素化合物 。
对矿物油和石油基残留物有效 。可在大多数金属表面和涂漆表面上使用 。消除机器，发动机部件和舱底的油污。浸泡清洁机械部件。快速冲洗，保持清洁和无油表面。
Product Number Product name
571430 COLDWASH HD 25 LTR
使用说明
该产品非常适用于污染表面，舱底和机械部件。
这种脱脂剂必须用刷子，手工喷雾，浸泡 ，浸泡等整洁地涂抹。接触或浸泡时间应在15分钟至2小时之间，然后用热水或冷水冲洗。热水将改善清洁效果。
现场清洁
将整洁的UNITOR™Coldwash HD™喷洒在待清洁的表面上。如果时间允许，联系时间应至少为30分钟或最多2小时。可以使用高压清洁机冲洗隔板/墙壁。使用60-80°C的热水可获得最佳效果 。
喷雾法
将UNITOR™Coldwash HD™喷涂在污染的表面上。接触时间应在15-30分钟之间，然后用水冲洗。为了清洁顽固的沉积物 ，机械搅拌如擦洗将改善清洁 。
浸泡法
将待清洁的部件浸入洁净的UNITOR™Coldwash HD™浴中30分钟 ，然后用水冲洗。
循环方式
可以通过循环使用UNITOR™Coldwash HD™来清洁润滑油热交换器，燃油预热器和过滤器等设备。
版权所有：江苏OG真人贸易有限公司 备案号 ：苏ICP备17042192号-1 网站建设：