上一个
下一个
产品中心 Products Center
搜索
全部分类
1/1
浏览量:
1000
779094 DIESELPOWER LUBRICITY 25 LTR
浏览量:
1000
产品编号
650-779094
数量
-
+
1
产品描述
Product information
This product supersedes product no: 777195
Unitor DieselPower Lubricity has been found to be particularly effective in ultra low sulphur diesel fuels and gas oils that are blended to meet governmental regulations on fuel sulphur content.
Unitor DieselPower Lubricity also provides excellent performance as a lubricity improver component in diesel detergent packages and does not affect the water emulsification tendency of a fuel as measured by ASTMD-1094.
Features
- Improves the lubricity of low sulphur diesel fuels
- Can be used as a stand-alone product or component in diesel packages
- Effective at 50-150 ppm range in meeting the HFRR requirement for lubricity specifications
- Does not interact with the fuel
Benefits
- Protects your engine from wear so you can avoid unscheduled and expensive maintenance
- Quality is ensured so you can rest easy with good engine protection
- You can safely use the product in all types of fuels
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-6 |
|---|
Physical properties
| Appearance | Yellow |
|---|---|
| Density [kg/dm3] | 0,895 |
| Flash Point [°C] | 180 |
| Form | Liquid |
| Materials compatibility | Teflon, Viton , Plasite 10-7122, Plasite 10-9500, Mild Steel, Mild Aluminium, Brass, 304 SS, 316 SS and copper |
| Pour Point [°C] | 6 |
| Solubility | Insoluble in water, soluble with most organic solvents |
Technical data
| Not Compatible | Natural Rubber, Vinyl, Polyethylene, Neoprene, PVC, Hypalon, Buna-N , Polypropylene, Plexiglas, Ethylene, Propylene Rubber and Polyurethane |
|---|
Directions for use
Dosing Method
Preferable application of DieselPower Lubricity is directly into the transfer pump suction to ensure proper mixing. Product may be added to storage or blending tanks with adequate mixing. Dosage of DieselPower Lubricity may vary depending on the fuel quality.
Best dosing and storage temperature : 20 °C (68 ° F) - 40 °C (104 °F)
Sampling and Testing
DieselPower Lubricity also provides excellent performance as a lubricity improver component in diesel detergent packages and does not affect the water emulsification tendency of a fuel as measured by ASTMD-1094.
Dosing and Control
The normal dosage of DieselPower Lubricity is between 100 and 200 ppm (100 to 200 mls per m3 fuel). Independent testing has shown that an application of around 125ppm can improve the HFRR wear scar performance of ULSD to below the specification level of 460um. DieselPower Lubricity may be blended with other components into diesel detergent packages for ultra low sulphur diesel fuel and has no known adverse interaction with common components such as detergents, pour point improvers, cetane improvers or antifoams.
产品特性
• 改善低硫柴油的润滑性
• 可用作柴油包装中的独立产品或组件
• 有效在50-150 ppm范围内，符合HFRR润滑性规格要求
• 不与燃料相互作用
优势
• 保护您的发动机免受磨损，以避免计划外和昂贵的维护
• 确保质量，因此您可以通过良好的发动机保护降低工作负担
• 您可以安全地将产品用于所有类型的燃料
Unitor DieselPower Lubricity 已被发现在超低硫柴油燃料和瓦斯油中特别有效，这些燃料和瓦斯油经过混合以符合政府关于燃料硫含量的规定 。
Unitor DieselPower Lubricity 还提供优异的耐久性作为柴油清洗剂包装中的润滑性改进剂，并且不影响燃料的水乳化倾向 ，如ASTMD-1094所测量 。
订购信息
Product Number Product name
777195 DIESELPOWER LUBRICITY 25 LTR
使用说明
加药方法
DieselPower Lubricity的优先应用是直接进入输送泵吸入 ，以确保正确混合。可以在充分混合的情况下将产品添加到储存罐或混合罐中 。柴油动力润滑剂的剂量可能因燃料质量而异 。
采样和测试
DieselPower Lubricity还提供优异的每种形状作为柴油清洗剂包装中的润滑性改进剂组分，并且不影响燃料的水乳化倾向，如A S TMD - 1 0 9 4 所测量 。
剂量和控制
DieselPower Lubricity的正常剂量介于100和200ppm（每m3燃料100至200毫升）。两者之间，独立测试表明，大约125ppm的应用可以将ULSD的HFRR磨损疤痕的耐久性提高到低于460um的规格水平 。柴油动力润滑剂可以与其他组分混合成柴油清洗剂包 ，用于超低硫柴油燃料，并且与清洗剂，倾点改进剂 ，十六烷值改进剂或消泡剂等常用组分没有已知的不良相互作用 。.
版权所有：江苏OG真人贸易有限公司 备案号：苏ICP备17042192号-1 网站建设 ：